ITH CALENDAR PROJECT

Looking for a small wallhanging project you can update each month? How about this quilted and pieced in-the-hoop calendar block?

I designed this calendar block to just ft my max square stitching area on my machine and to work with the 175mm blocks from some recently digitized sets, Halloween Scenes 1 and Halloween Scenes 2. I’m just wrapping up a few more sets that will also work for Thanksgiving and winter months (snowmen) that are similarly designed.

I haven’t found suitable designs for every month yet but do have November and December plus a couple of spring blocks. Of course, you can work in any design you choose simply by inserting it after color 5.

For October, I chose the multi-color Kitten and Pumpkins design from Halloween Scenes 1. There are two sets of Halloween scenes that will work perfectly for this project.

Each set has 10 designs in multi-color and 10 as single color and each one of those is available in multiple sizes. I used the 175mm version so I could stitch the month name onto the attached borders without rehooping.

I stitched through the batting but not the backing for this project. It fnishes out at about 12” square. The center is stitched frst, then the side borders are pieced on and embroidered, and fnally the top and bottom borders are pieced on and embroidered.

I foated all the pieces onto hooped stabilizer. I chose to color in the center embroidery with InkTense colored pencils for additional interest.

SKILL LEVEL

Basic embroidery and customizing skills. If you’re working with one of the calendar blanks to create your own version, you’ll need to know how to combine designs by inserting a design after a specifc color change.

WHAT YOU’LL NEED

• Suitable fabrics for blocks, pre-washed and pressed (Tip: If fabrics are especially soft, starching can reduce distortion when stitching. Rotary cutter, quilting ruler and mat
• Stabilizer: I used Sulky Soft ‘n Sheer. Other suitable choices are washaway backing and washaway tearaway.
• Appliqué tacking iron
• An embroidery machine with a minimum sewing feld of 11½” x 9¾” for the blocks
• Suitable embroidery threads and sewing threads
• Optional: InkTense colored pencils or other media for coloring

WHAT’S INCLUDED WITH THE COLLECTION

• Twelve ITH “calendar blanks” digitized for piecing in the hoop (preset for each month)
• One block with a ready-made design already inserted (Halloween block for October)
• 12 “month name” designs
• This instructional PDF

SUPPLIES

I worked from various fat quarters in my fabric stash. The measurements listed below are for the calendar block designs in this set; adjust accordingly for how the sizes you’ll be using and the hoop(s) you’ll be using if they vary.

• Batting: 14” square (I used Floriani’s Quilter Select)
• Fusible Fleece: 14” square, optional (I used Pellon Fusible Fleece)
• Center block: 8” square (I used white Kona Cotton)
• Sashing: 2 strips 2¾” x 8” (Sides) + 2 strips ) 2¾” x 13” (top & bottom)
• Backing: 13” square
• Binding: I cut mine on the bias at 2¼” wide.

SETTING UP THE DESIGN

If you’re stitching this bonus October Halloween block, just load the design to your machine.

Otherwise, use one of the 12 calendar block “blanks,” which includes the basic ITH steps for each month and insert the design of your choice after color #5, which can be done either in software or at your machine. The center area is designed for a 175mm square design.

The month names are also included separately in case you have a smaller hoop and are unable to do the project in the hoop. You’re on your own for working that out.

WHY AREN’T THERE DESIGNS FOR EVERY MONTH?

This set is designed to make it easy for you to select your own monthly designs. Not everyone celebrates the same holidays and while we in the northern hemisphere experience winter in December, my Aussie friends are enjoying summer.

Another reason there aren’t designs for every month is I haven’t found artwork for every month yet. I will be posting similarly styled designs as I fnd them and get them done. In the meantime, you’re able to create your own calendar blocks with your own designs.

HOW TO SEW

Start by hooping the stabilizer. I used Sulky Soft ‘n Sheer. Other good choices would be washaway fber or wash-away tear-away. Because I’m using a large hoop and my stabilizer is thin, I used duct tape on the back to prevent slippage between the rings.

I foated the batting for this project because I didn’t have enough to hoop all the away around. Hooping would have made the top and bottom month names easier to stitch.

The first color sews the placement guide for the center area. Use any color for this step; it will be covered by batting and won’t be visible. You can use the same color for the frst 5 color changes if it works with your center block fabric.

Center the batting over this guide. I layered on a piece of fusible feece, fusible side up on top of that. Sew the tack down stitch.

Layer the center fabric so that it extends evenly on all sides of the tack down stitch and press lightly to tack it to the fusible feece. Sew the second tack-down stitch.

When I was testing this design, I found it easier to accurately place the center block in a separate step rather than with the batting.

Sew the central design.

Attach the Side Borders

Using the tack-down stitches as a reference, align your side borders right side down making sure they extend beyond the tack-down stitches about ¼”.

Sew the side seams. Trim seam allowances if needed, fip the borders open, fnger press the seam and then press in place to tack to fusible feece. Pins can also help secure the side borders. Stitch the month names for the side borders.

Attach the Top and Bottom Borders

Repeat the process to add the top and borders. Make sure the borders extend to the outer edges of the side borders. Stitch in place, trim seams if needed, press open, stitch month names.

Remove from the hoop. Square up the block and trim borders to size. Mine are trimmed to 2¼”.

COLORING THE CENTER AREA (OPTIONAL)

One of the reasons I love redwork and color line designs is that I can embellish them with other media. For this project, I used InkTense colored pencils. I’ve tried a variety of media and these are by far the easiest, no mess, and most permanent media I’ve found that still leaves the fabric soft.

I lightly colored in areas and then used clear aloe vera gel thinned with water to a bit thinner than egg whites to blend and activate the ink in these pencils. The aloe vera will prevent the water from wicking into other areas causing the ink to bleed. When dry, the color is permanent.

Do apply the liquid carefully, brushing by area. If you get sloppy, colors can run together. Colors can be blended until they are set after drying.

FINISHING

I chose a fall print for the back, created a label using Adine Script, added a sleeve for a hanging rod, and fnished with a bias binding. Most quilters know how to do these things. If you don’t, do a search on YouTube for video step-by-steps.

EXTRA TIPS

If you don’t have a large enough hoop to complete the full project, hoop your center fabric, batting, and stabilizer and manually attach the borders. You’ll need to rehoop for the month names. You may need to cut your stabilizer and batting larger to allow for adequate hooping area for the month names.

USING OTHER DESIGNS

Another good choice for a monthly calendar project are the Birth Month Flowers of the Year. These designs come in filled, appliqué, and redwork versions and while optimized for a 200mm square sewing feld, these designs have been split and can be multi-hooped using a minimum 5x7” hoop. Just use the month names to create your own version.

SUMMARY

Projects don’t have to be elaborate. Yes, you could make a huge king-size quilt but small individual blocks like these are easy to turn into a seasonal mini-wallhanging or pillow covers.

Also, small projects like these make it easy to experiment with different media and techniques without a large investment in fabric, supplies, and time