You have no items in your shopping cart.

May Day Sucker Holder

Available in 1 Sizes: May Day Sucker Holder
Formats: ART, CSD, DST, EMB, EXP, HUS, JEF, PCS, PES, SEW, VIP, XXX
Brand: Starbird Inc
SKU: SB01-STRBDPP1005
$71.50
Steps:
  1. First hoop one piece of tear away backing in your hoop. Then sew the 1st color stop which is the dieline.
  2. After the dieline has sewn, stop the machine and place the top applique piece.
  3. Start the machine again and embroider the design until the next applique placement stop.
  4. Remove the hoop from your machine. Do not unhoop the design. Turn the hoop over so you are looking at the back of the design. Cut a piece of ribbon long enough that you will be able to hang the design. Tape each end inside the design as shown.
  5. Now place the bottom applique piece on the back of the design making sure that the applique piece is secure and will not fall off when you return the hoop to the machine.
  6. Carefully return the hoop to your machine and continue embroidering the design. Once the design is completed remove the tear away backing and slide your sucker into the slots.
  7. Finished May Day Sucker Holder.
Materials Required
  • 1 May Day Sucker Holder embroidery design
  • Tear away backing
  • Bobbin thread to match the thread color of the last color stop
  • 2 Applique fabric pieces
  • Ribbon
  • Suckers
  • Tape
For further details please refer to the project instructions
   STRBDPP1005 Project Instructions  
PDFs are available on purchase
Top Picks For You
SB01-STRBDPP1003
SKU: SB01-STRBDPP1003
Brand: Starbird Inc

$79.50
Free Design Warnings

3 free designs per week with no purchase,

6 free designs per week with $35 purchase, or

9 free designs per week with $75 purchase.

Close
Close