FSL- Christmas Angel

Available in 1 Sizes:	FSL- Christmas Angel
Hoop Size:	6" X 10"
Formats:	ART, DST, EXP, HUS, JEF, PEC, PES, SEW, VIP, XXX
Brand:	Kinship Kreations
SKU:	KK01-KKPP003

Your price: $3.75

Price: $15.00

Qty:

About this Item
Overview
Designs Included
Instructions

What a pretty free standing lace Christmas angel and light project! Stitch this out and use as a decoration in your home or give as a cute gift!

Materials Required:
Woven Water Soluable Stabilizer White and Red POLYESTER embroidery thread (DO NOT USE Rayon) 1 LED small light. This project used a 1 ¼ “ x 1 ¾”, but smaller would also work. DO NOT USE A REGULAR CANDLE Clear glue (optional or sew with white thread) White machine thread, or just a needle and thread Kinship Kreation Holiday/Light Angel front and back design. (Back design is included when you purchase the front)
Steps:
Step 1. Hoop the woven water soluable stabilizer. Make sure it is doubled as it needs this extra stabilizer. Thread your machine with POLYESTER thread. DO NOT use Rayon as it will not sew as good. Step 2. Select your favorite Kinship Kreations Holiday/Light Lace design (both front and back) and sew onto the woven water soluable stabilizer. Step 3. After it is sewn out carefully cut around the design leaving a good 1/2" to 1" of stabilizer around the edge. Do not cut into any threads. Step 4. Very carefully run under water for just a second or two. This project usually get it wet and let it sit in my hand for a minute until the stabilizer disolves. After the stabilizer starts to dissolve you can take your fingers and remover the rest. Step 5. Carefully lay the wet angel on a linen (or flat, no nap) towel and pat down. Do not attempt to remove the lace until completely dry. After laying the angel on the towel if the edges start to roll up slightly (make sure you do this before it is completely dry. Step 6. You can complete your angel light by putting the front and back together a couple different ways. This project tried both and worked well, but the sewing (if you have a machine or whip stitch by hand) is the best way to go, even on the upper half. Step 7. After the front and back dried take the angel to the sewing machine to finish. You need to make sure you have your machine set for zigzag so the needle swings beyond the satin outline. The stabilizer has done it’s job and it is stiff. Step 8. After sewing the sides together, just do a finger press to both sides.
For further details please refer to the project instructions

FSL-Holiday/Light Noel Front
Stitches: 51785
H/W: 6.8" x 5.51"

FSL-Holiday/Light Noel Back
Stitches: 50539
H/W: 6.8" x 5.51"

How to sew and assemble a free standing lace holiday light Instructions

PDFs are available on purchase

What a pretty free standing lace Christmas angel and light project! Stitch this out and use as a decoration in your home or give as a cute gift!

Embroidery design project pack, FSL- Christmas Angel from Kinship Kreations designs in all the popular formats including ART, DST, EXP, HUS, PES, XXX and many more. Download today. Kinship Kreations has worked hard to come up with FSL- Christmas Angel and is proud to have this embroidery project pack available for you here at grandslamdesigns.com. Not only will grandslamdesigns.com provide you with the best customer service in the market, but you will not be disappointed with this embroidery project pack. Kinship Kreations has some of the best artist, creative minds and digitizers and has put together this project pack so that you can impress all your customers, family and friends with this one.

Top Picks For You

Free Standing Lace – Christmas Stocking

KK01-KKPP008

SKU:	KK01-KKPP008
Brand:	Kinship Kreations

$3.12 $12.50

Sweetheart Tea Light Angel

LGE01-lgp028

SKU:	LGE01-lgp028
Brand:	Lindee G Embroidery
One angel 4 ways: full free-standing lace and direct embroidery for organza, each optimized for single color and again as multicolor. The finished angel stands approximately 7" tall, stands without support, and is perfect to place over a battery operated tea light.

$29.95

Christmas Tree Ornament Embroidery Project Pack

LMO1-LMO100

a Christmas tree ornament project. Requires 3 hooping's, 2 for the tree and one for the felt flowers. Add a set of craft LED lights, pop onto a pretty glass, jar or a candle stand and you have a beautiful mantel piece or table ornament. Make a few and arrange it at different heights for a spectacular table setting.

SKU:	LMO1-LMO100
Brand:	Louisa Meyers Originals

$17.50

Christmas Tree Truck Embroidery Project Pack

TD01-578TDGS

SKU:	TD01-578TDGS
Brand:	Tiny Dreams

$6.50